High density packaging technology
Advanced high-density packaging technology is used to ensure a perfect balance between efficiency and reliability. Component efficiency is increased by more than 0.15%.
It meets the requirements of front load 5400Pa and rear load 2400Pa, adapting to different installation environments. The frame design has been carefully considered to ensure the long-term stability of the battery assembly.
Product model |
|
|||||
---|---|---|---|---|---|---|
quality assurance | ||||||
Product quality assurance | 12 years | |||||
Power output guaranteed | 25.84% output power guarantee for 8 years | |||||
Electrical Performance Parameters (STC) | ||||||
Peak power (Pmax) |
|
|||||
Peak Operating Voltage (Vmpp) |
|
|||||
Peak Operating Current (IMPP) |
|
|||||
Open circuit voltage (Voc) |
|
|||||
Short circuit current (Isc) |
|
|||||
Component efficiency |
|
|||||
Power deviation (positive) |
|
|||||
Standard test conditions (STC): solar radiation flux 1000W/m2, atmospheric parameters 1.5, module temperature 25 °C. | ||||||
Electrical Performance Parameters (NOCT) | ||||||
Peak power (Pmax) |
|
|||||
Peak Operating Voltage (Vmpp) |
|
|||||
Peak Operating Current (IMPP) |
|
|||||
Open circuit voltage (Voc) |
|
|||||
Short circuit current (Isc) |
|
|||||
Maximum endurance temperature | 45±2 °C | |||||
Cell nominal operating temperature (NOCT): solar radiation flux 800W/m2, atmospheric parameters 1.5, ambient temperature 20 °C, wind speed 1 m/s. | ||||||
Temperature characteristics | ||||||
Operating temperature | -40~85 °C | |||||
Temperature coefficient (Pmax) | -0.34 %/°C | |||||
Temperature coefficient (Voc) | -0.27 %/°C | |||||
Temperature coefficient (Isc) | 0.045 %/°C | |||||
System integration parameters | ||||||
Maximum system voltage | 1500 V | |||||
Fuse current rating | 25 A | |||||
Physical parameters | ||||||
Module dimensions (height/width/thickness) | 2093x1134x35 mm | |||||
weight | 25.4 kg | |||||
Cell type | Single crystal silicon | |||||
Number of cells | 132 | |||||
Glass type | Anti-reflective coating | |||||
Glass thickness | 3.2 mm | |||||
The border type | Anodized aluminum alloy | |||||
Number of bypass diodes | 3 | |||||
Junction box protection rating | IP 68 | |||||
Cable cross-section | 4 mm2 | |||||
Cable length | 1200 mm |